Tech Tips RSS
In this tech video Kenny talks tech on how to set up the bar when you first start, how to adjust the sway bar end links to eliminate any preload on the bar, and lubricating the bushing to prevent noise and promote smooth movement.
One of the biggest mistakes made when you're making suspension changes is pre-loading the bushings. In this video, Kenny talks about what you need to know when swapping out bushings and control arms.
Traction, forward bite, and acceleration off the corners all depend on suspension and how it puts the power down. In this tech video, Kenny explains why most late-model Mustangs have poor traction and how to correct that problem.
Oil separators are no joke when it comes to Mustang engines from 1996 and beyond. They just blow oil straight through the PVC and into the intake under hard loads and cornering, and that oil will go straight through the system and out the back. In this tech tip video, Kenny explains the basics of why he always uses an oil separator on his custom Mustang builds.
In this tech video, Kenny provides tips on where to place fire suppression nozzles if you're using an onboard system. If you're not using a dedicated safety bottle with electric or manual activation, you should seriously consider having at least a handheld fire bottle.
